2K2000启动新世界

xunmi

有人用2K2000的板子启动过新世界吗, 我看固件里已经可以设置物理地址了, 但启动的时候会有acpi相关报错
试了archlinux不行后又去编了个最新的6.8内核启动也是一模一样的地方报错, 大佬看看这应该是内核的问题还是固件的问题
[    0.000000] Linux version 6.7.0-rc2-2 (linux@archlinux) (gcc (GCC) 13.2.1 20230906, GNU ld (GNU Binutils) 2.41.0) #1 SMP PREEMPT Mon, 27 Nov 2023 08:42:49 +0000
[    0.000000] 64-bit Loongson Processor probed (LA364 Core)
[    0.000000] CPU0 revision is: 0014b000 (Loongson-64bit)
[    0.000000] FPU0 revision is: 00000001
[    0.000000] efi: EFI v2.7 by EDK II
[    0.000000] efi: ACPI 2.0=0xf9d50000 SMBIOS 3.0=0xfe030000 INITRD=0xf98b9e98 MEMRESERVE=0xf98b9818 MEMMAP=0xf80ee998 
[    0.000000] earlycon: uart0 at MMIO 0x000000001fe001e0 (options '115200n8')
[    0.000000] printk: legacy bootconsole [uart0] enabled
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000F9D50000 000024 (v02 LOONGS)
[    0.000000] ACPI: XSDT 0x00000000F9D40000 000064 (v01 LOONGS LOONGSON 00000002      01000013)
[    0.000000] ACPI: FACP 0x00000000F9D10000 0000F4 (v03 LOONGS LOONGSON 00000002 LIUX 01000013)
[    0.000000] ACPI: DSDT 0x00000000F9CE0000 001D49 (v02 LOONGS LOONGSON 00000002 INTL 20181213)
[    0.000000] ACPI: FACS 0x00000000F9D20000 000040
[    0.000000] ACPI: APIC 0x00000000F9D30000 0000A0 (v01 LOONGS LOONGSON 00000002 LIUX 01000013)
[    0.000000] ACPI: IVRS 0x00000000F9D00000 00004C (v01 LARCH  LOONGSON 00000001 LIUX 00000001)
[    0.000000] ACPI: MCFG 0x00000000F9CF0000 00003C (v01 LOONGS LOONGSON 00000001 LIUX 01000013)
[    0.000000] ACPI: SRAT 0x00000000F9CD0000 0000A0 (v02 LOONGS LOONGSON 00000002 LIUX 01000013)
[    0.000000] ACPI: SLIT 0x00000000F9CC0000 00002D (v01 LOONGS LOONGSON 00000002 LIUX 01000013)
[    0.000000] ACPI: VIAT 0x00000000F9CB0000 00002C (v01 LOONGS LOONGSON 00000002 LIUX 01000013)
[    0.000000] ACPI: PPTT 0x00000000F9CA0000 0000D8 (v03 LOONGS LOONGSON 00000002 LIUX 01000013)
[    0.000000] OF: fdt: No valid device tree found, continuing without
[    0.000000] SRAT: PXM 0 -&gt; CPU 0x00 -&gt; Node 0
[    0.000000] SRAT: PXM 0 -&gt; CPU 0x01 -&gt; Node 0
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0fffffff]
[    0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x90000000-0x26fffffff]
[    0.000000] Node0: mem_type:2, mem_start:0x200000, mem_size:0x18a0000 Bytes
[    0.000000]        start_pfn:0x80, end_pfn:0x6a8, num_physpages:0x628
[    0.000000] Node0: mem_type:7, mem_start:0x1aa0000, mem_size:0xd360000 Bytes
[    0.000000]        start_pfn:0x6a8, end_pfn:0x3b80, num_physpages:0x3b00
[    0.000000] Resvd: mem_type:6, mem_start:0x10000000, mem_size:0x10000000 Bytes
[    0.000000] Node0: mem_type:7, mem_start:0x90100000, mem_size:0x2ffc0000 Bytes
[    0.000000]        start_pfn:0x24040, end_pfn:0x30030, num_physpages:0xfaf0
[    0.000000] Node0: mem_type:4, mem_start:0xc00c0000, mem_size:0x2b0000 Bytes
[    0.000000]        start_pfn:0x30030, end_pfn:0x300dc, num_physpages:0xfb9c
[    0.000000] Node0: mem_type:7, mem_start:0xc0370000, mem_size:0x35040000 Bytes
[    0.000000]        start_pfn:0x300dc, end_pfn:0x3d4ec, num_physpages:0x1cfac
[    0.000000] Node0: mem_type:2, mem_start:0xf53b0000, mem_size:0x2d30000 Bytes
[    0.000000]        start_pfn:0x3d4ec, end_pfn:0x3e038, num_physpages:0x1daf8
[    0.000000] Node0: mem_type:9, mem_start:0xf80e0000, mem_size:0x10000 Bytes
[    0.000000]        start_pfn:0x3e038, end_pfn:0x3e03c, num_physpages:0x1dafc
[    0.000000] Resvd: mem_type:9, mem_start:0xf80e0000, mem_size:0x10000 Bytes
[    0.000000] Node0: mem_type:7, mem_start:0xf80f0000, mem_size:0x2000 Bytes
[    0.000000]        start_pfn:0x3e03c, end_pfn:0x3e03c, num_physpages:0x1dafc
[    0.000000] Node0: mem_type:1, mem_start:0xf80f2000, mem_size:0x83d000 Bytes
[    0.000000]        start_pfn:0x3e03c, end_pfn:0x3e24b, num_physpages:0x1dd0b
[    0.000000] Node0: mem_type:2, mem_start:0xf892f000, mem_size:0x7fd000 Bytes
[    0.000000]        start_pfn:0x3e24b, end_pfn:0x3e44b, num_physpages:0x1df0a
[    0.000000] Node0: mem_type:1, mem_start:0xf912c000, mem_size:0x782000 Bytes
[    0.000000]        start_pfn:0x3e44b, end_pfn:0x3e62b, num_physpages:0x1e0ea
[    0.000000] Node0: mem_type:4, mem_start:0xf98ae000, mem_size:0x9000 Bytes
[    0.000000]        start_pfn:0x3e62b, end_pfn:0x3e62d, num_physpages:0x1e0ec
[    0.000000] Node0: mem_type:7, mem_start:0xf98b7000, mem_size:0x2000 Bytes
[    0.000000]        start_pfn:0x3e62d, end_pfn:0x3e62e, num_physpages:0x1e0ec
[    0.000000] Node0: mem_type:2, mem_start:0xf98b9000, mem_size:0x1000 Bytes
[    0.000000]        start_pfn:0x3e62e, end_pfn:0x3e62e, num_physpages:0x1e0ec
[    0.000000] Node0: mem_type:7, mem_start:0xf98ba000, mem_size:0x4000 Bytes
[    0.000000]        start_pfn:0x3e62e, end_pfn:0x3e62f, num_physpages:0x1e0ed
[    0.000000] Node0: mem_type:2, mem_start:0xf98be000, mem_size:0x2000 Bytes
[    0.000000]        start_pfn:0x3e62f, end_pfn:0x3e630, num_physpages:0x1e0ed
[    0.000000] Node0: mem_type:4, mem_start:0xf98c0000, mem_size:0x3c3000 Bytes
[    0.000000]        start_pfn:0x3e630, end_pfn:0x3e720, num_physpages:0x1e1dd
[    0.000000] Node0: mem_type:1, mem_start:0xf9c83000, mem_size:0x1d000 Bytes
[    0.000000]        start_pfn:0x3e720, end_pfn:0x3e728, num_physpages:0x1e1e4
[    0.000000] Node0: mem_type:9, mem_start:0xf9ca0000, mem_size:0x80000 Bytes
[    0.000000]        start_pfn:0x3e728, end_pfn:0x3e748, num_physpages:0x1e204
[    0.000000] Resvd: mem_type:9, mem_start:0xf9ca0000, mem_size:0x80000 Bytes
[    0.000000] Node0: mem_type:9, mem_start:0xf9d30000, mem_size:0x30000 Bytes
[    0.000000]        start_pfn:0x3e74c, end_pfn:0x3e758, num_physpages:0x1e210
[    0.000000] Resvd: mem_type:9, mem_start:0xf9d30000, mem_size:0x30000 Bytes
[    0.000000] Node0: mem_type:7, mem_start:0xf9d60000, mem_size:0x6000 Bytes
[    0.000000]        start_pfn:0x3e758, end_pfn:0x3e759, num_physpages:0x1e211
[    0.000000] Node0: mem_type:4, mem_start:0xf9d66000, mem_size:0x2eb000 Bytes
[    0.000000]        start_pfn:0x3e759, end_pfn:0x3e814, num_physpages:0x1e2cb
[    0.000000] Node0: mem_type:7, mem_start:0xfa051000, mem_size:0x25a000 Bytes
[    0.000000]        start_pfn:0x3e814, end_pfn:0x3e8aa, num_physpages:0x1e361
[    0.000000] Node0: mem_type:4, mem_start:0xfa2ab000, mem_size:0x2ab5000 Bytes
[    0.000000]        start_pfn:0x3e8aa, end_pfn:0x3f358, num_physpages:0x1ee0e
[    0.000000] Node0: mem_type:7, mem_start:0xfcd60000, mem_size:0x591000 Bytes
[    0.000000]        start_pfn:0x3f358, end_pfn:0x3f4bc, num_physpages:0x1ef72
[    0.000000] Node0: mem_type:3, mem_start:0xfd2f1000, mem_size:0x96f000 Bytes
[    0.000000]        start_pfn:0x3f4bc, end_pfn:0x3f718, num_physpages:0x1f1cd
[    0.000000] Resvd: mem_type:5, mem_start:0xfdc60000, mem_size:0x1c0000 Bytes
[    0.000000] Resvd: mem_type:6, mem_start:0xfde20000, mem_size:0x400000 Bytes
[    0.000000] Node0: mem_type:7, mem_start:0xfe220000, mem_size:0x21000 Bytes
[    0.000000]        start_pfn:0x3f888, end_pfn:0x3f890, num_physpages:0x1f1d5
[    0.000000] Node0: mem_type:4, mem_start:0xfe241000, mem_size:0x21000 Bytes
[    0.000000]        start_pfn:0x3f890, end_pfn:0x3f898, num_physpages:0x1f1dd
[    0.000000] Node0: mem_type:3, mem_start:0xfe262000, mem_size:0x39000 Bytes
[    0.000000]        start_pfn:0x3f898, end_pfn:0x3f8a6, num_physpages:0x1f1eb
[    0.000000] Node0: mem_type:4, mem_start:0xfe29b000, mem_size:0xd41000 Bytes
[    0.000000]        start_pfn:0x3f8a6, end_pfn:0x3fbf7, num_physpages:0x1f53b
[    0.000000] Node0: mem_type:3, mem_start:0xfefdc000, mem_size:0x22000 Bytes
[    0.000000]        start_pfn:0x3fbf7, end_pfn:0x3fbff, num_physpages:0x1f543
[    0.000000] Node0: mem_type:4, mem_start:0xfeffe000, mem_size:0x2000 Bytes
[    0.000000]        start_pfn:0x3fbff, end_pfn:0x3fc00, num_physpages:0x1f543
[    0.000000] Node0: mem_type:7, mem_start:0xff000000, mem_size:0x16e600000 Bytes
[    0.000000]        start_pfn:0x3fc00, end_pfn:0x9b580, num_physpages:0x7aec3
[    0.000000] Node0: mem_type:1, mem_start:0x26d600000, mem_size:0x2a00000 Bytes
[    0.000000]        start_pfn:0x9b580, end_pfn:0x9c000, num_physpages:0x7b943
[    0.000000] Resvd: mem_type:0, mem_start:0xee00000, mem_size:0x1200000 Bytes
[    0.000000] Resvd: mem_type:0, mem_start:0x90000000, mem_size:0x100000 Bytes
[    0.000000] Node0's addrspace_offset is 0x0
[    0.000000] Node0: start_pfn=0x80, end_pfn=0x9c000
[    0.000000] SMBIOS 3.2.0 present.
[    0.000000] DMI: To Be Filled By O.E.M To Be Filled By O.E.M/To Be Filled By O.E.M, BIOS Loongson-UDK2018-V4.0.05569-stable202308 01/23/24 09:45
[    0.000000] CpuClock = 1000000000
[    0.000000] The BIOS Version: Loongson-UDK2018-V4.0.05569-stable202308
[    0.000000] software IO TLB: area num 2.
[    0.000000] software IO TLB: mapped [mem 0x0000000003920000-0x0000000007920000] (64MB)
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x033a0000-0x033a3fff]
[    0.000000] Detected 2 available CPU(s)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000200000-0x000000000edfffff]
[    0.000000]   node   0: [mem 0x0000000090100000-0x00000000f9d1ffff]
[    0.000000]   node   0: [mem 0x00000000f9d30000-0x00000000fdc5ffff]
[    0.000000]   node   0: [mem 0x00000000fe220000-0x000000026fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x000000026fffffff]
[    0.000000] On node 0, zone DMA32: 128 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 33984 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 4 pages in unavailable ranges
[    0.000000] On node 0, zone DMA32: 368 pages in unavailable ranges
[    0.000000] On node 0, zone Normal: 16384 pages in unavailable ranges
[    0.000000] percpu: Embedded 5 pages/cpu s37992 r8192 d35736 u16777216
[    0.000000] Kernel command line: BOOT_IMAGE=/arch/boot/loong64/vmlinuz-linux archisobasedir=arch archisodevice=UUID=2023-12-30-06-01-24-00 loglevel=7 verbose earlycon=uart,mmio,0x1fe001e0
[    0.000000] Unknown kernel command line parameters "verbose BOOT_IMAGE=/arch/boot/loong64/vmlinuz-linux archisobasedir=arch archisodevice=UUID=2023-12-30-06-01-24-00", will be passed to .
[    0.000000] Dentry cache hash table entries: 1048576 (order: 9, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 8, 4194304 bytes, linear)
[    0.000000] Fallback order for Node 0: 0 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 504210
[    0.000000] Policy zone: Normal
[    0.000000] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.000000] Memory: 7881984K/8099008K available (13120K kernel code, 4700K rwdata, 5740K rodata, 576K init, 939K bss, 217024K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000]  Trampoline variant of Tasks RCU enabled.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 576, nr_irqs: 576, preallocated irqs: 16
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Constant clock event device register
[    0.000000] clocksource: Constant: mask: 0xffffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
[    0.000000] sched_clock: 64 bits at 100MHz, resolution 10ns, wraps every 4398046511100ns
[    0.008043] Constant clock source device register
[    0.012900] Console: colour dummy device 80x25
[    0.017369] ACPI: Core revision 20230628
[    0.021365] Calibrating delay loop (skipped), value calculated using timer frequency.. 200.00 BogoMIPS (lpj=400000)
[    0.031753] pid_max: default: 32768 minimum: 301
[    0.036381] LSM: initializing lsm=capability,yama,integrity
[    0.041933] Yama: becoming mindful.
[    0.045491] Mount-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[    0.053060] Mountpoint-cache hash table entries: 16384 (order: 3, 131072 bytes, linear)
[    0.062008] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.069057] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[    0.076623] Performance counters: loongarch/loongson64 PMU enabled, 4 64-bit counters available to each CPU.
[    0.086469] rcu: Hierarchical SRCU implementation.
[    0.091237] rcu:     Max phase no-delay instances is 1000.
[    0.096834] smp: Bringing up secondary CPUs ...
[    0.101564] Booting CPU#1...
[    0.104476] 64-bit Loongson Processor probed (LA364 Core)
[    0.104480] CPU1 revision is: 0014b000 (Loongson-64bit)
[    0.104485] FPU1 revision is: 00000001
[    0.104502] CPU#1 finished
[    0.121521] smp: Brought up 1 node, 2 CPUs
[    0.126073] devtmpfs: initialized
[    0.130428] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.140130] futex hash table entries: 512 (order: 1, 32768 bytes, linear)
[    0.146970] pinctrl core: initialized pinctrl subsystem
[    0.152627] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.158934] audit: initializing netlink subsys (disabled)
[    0.164380] audit: type=2000 audit(0.112:1): state=initialized audit_enabled=0 res=1
[    0.164629] thermal_sys: Registered thermal governor 'step_wise'
[    0.172182] hw-breakpoint: Found 4 breakpoint and 2 watchpoint registers.
[    0.185542] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[    0.192295] HugeTLB: 112 KiB vmemmap can be freed for a 32.0 MiB page
[    0.206435] ACPI: Added _OSI(Module Device)
[    0.210607] ACPI: Added _OSI(Processor Device)
[    0.215021] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.219694] ACPI: Added _OSI(Processor Aggregator Device)
[    0.228271] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.239809] ACPI Error: Could not enable GlobalLock event (20230628/evxfevnt-182)
[    0.247281] ACPI Warning: Could not enable fixed event - GlobalLock (1) (20230628/evxface-618)
[    0.255852] ACPI Error: No response from Global Lock hardware, disabling lock (20230628/evglock-59)
[    0.265406] ACPI: Interpreter enabled
[    0.269081] ACPI: PM: (supports S0 S3 S4 S5)
[    0.273329] ACPI: Using LPIC for interrupt routing
[    0.278114] ACPI: MCFG table detected, 1 entries
[    0.283440] ACPI: \_SB_.PCI0.PCIB.XHCI.PUBS: New power resource
[    0.294764] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.300922] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI HPX-Type3]
[    0.308796] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[    0.318489] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[    0.326794] acpi PNP0A08:00: MCFG quirk: ECAM at [mem 0xfe00000000-0xfe0fffffff] for [bus 00-ff] with loongson_pci_ecam_ops
[    0.337878] acpi PNP0A08:00: ECAM at [mem 0xfe00000000-0xfe1fffffff] for [bus 00-ff]
[    0.345708] ------------[ cut here ]------------
[    0.350300] kernel BUG at mm/vmalloc.c:106!
[    0.354458] Oops - BUG[#1]:
[    0.357229] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc2-2 #1 6076fac16c9edde94bc34f28aa91749218607fca
[    0.367089] Hardware name: To Be Filled By O.E.M To Be Filled By O.E.M/To Be Filled By O.E.M, BIOS Loongson-UDK2018-V4.0.05569-stable202308 01/23/24 09:45
[    0.380832] pc 90000000022bd238 ra 90000000022bd25c tp 90000001000b0000 sp 90000001000b3650
[    0.389132] a0 0000017dfbffc000 a1 9000000003843fc0 a2 fffffffffe000000 a3 9000000003786000
[    0.397432] a4 ffffff800000dfff a5 900000000800c2e0 a6 0000000000000001 a7 0000000000000001
[    0.405732] t0 ffffff8002000000 t1 90000001045c4000 t2 ffffffffffffffbf t3 000000fdfdff41c3
[    0.414032] t4 9000000003844000 t5 000000fdfc004000 t6 9000000003848000 t7 000000fdfc004000
[    0.422331] t8 ffffff800000dfff u0 90000000022ef444 s9 ffffff800000e000 s0 ffffff800000e000
[    0.430631] s1 0000000000000040 s2 0000000000004000 s3 ffffff800000e000 s4 00000000000001c3
[    0.438931] s5 ffffffffffffffbf s6 ffffff8000008000 s7 ffffff8000008000 s8 900000010024c000
[    0.447230]    ra: 90000000022bd25c ioremap_page_range+0x19c/0x280
[    0.453377]   ERA: 90000000022bd238 ioremap_page_range+0x178/0x280
[    0.459520]  CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
[    0.465677]  PRMD: 00000004 (PPLV0 +PIE -PWE)
[    0.470010]  EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
[    0.474776]  ECFG: 00071c1d (LIE=0,2-4,10-12 VS=7)
[    0.479539] ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
[    0.485078]  PRID: 0014b000 (Loongson-64bit, Loongson-2K2000)
[    0.490786] Modules linked in:
[    0.493816] Process swapper/0 (pid: 1, threadinfo=(____ptrval____), task=(____ptrval____))
[    0.502031] Stack : 9000000003843fc0 000000fdfc004000 0000000003f7f001 ffffff800000dfff
[    0.509995]         ffffff800000dfff 000000fdfc004000 0000000010000000 90000001000268e0
[    0.517958]         ffffffffffffc000 90000000033c5000 90000001000268a0 0000000010000000
[    0.525921]         0000000000000002 90000001045b8118 90000001045b8128 0000000000005fff
[    0.533884]         9000000100026880 90000000026e8960 9000000003903240 9000000100163000
[    0.541846]         9000000100163010 000000fdfc000000 000000fdfc004000 5a92ffdb41481d99
[    0.549809]         ffffffffffffffff 9000000100163000 ffffffffffffffff 0000000000000000
[    0.557771]         90000000033c5000 9000000100163000 0000000000000000 90000001045b8100
[    0.565734]         90000001045b8118 90000001045b8100 90000001000b3858 9000000002d19adc
[    0.573697]         90000001045b8100 90000000026e8b24 90000001000117a0 0000000000000000
[    0.581659]         ...
[    0.584085] Call Trace:
[    0.584088] [&lt;90000000022bd238&gt;] ioremap_page_range+0x178/0x280
[    0.592394] [&lt;90000000026e8960&gt;] acpi_pci_probe_root_resources+0x160/0x2a0
[    0.599230] [&lt;9000000002d19adc&gt;] acpi_prepare_root_resources+0x1c/0x180
[    0.605808] [&lt;90000000026e8b48&gt;] acpi_pci_root_create+0xa8/0x3c0
[    0.611776] [&lt;9000000002d1a020&gt;] pci_acpi_scan_root+0x2e0/0x440
[    0.617660] [&lt;90000000026e8124&gt;] acpi_pci_root_add+0x364/0x8c0
[    0.623455] [&lt;90000000026dd450&gt;] acpi_bus_attach+0x150/0x2e0
[    0.629081] [&lt;90000000028145cc&gt;] device_for_each_child+0x6c/0xe0
[    0.635052] [&lt;90000000026da95c&gt;] acpi_dev_for_each_child+0x3c/0x60
[    0.641196] [&lt;90000000026dd514&gt;] acpi_bus_attach+0x214/0x2e0
[    0.646820] [&lt;90000000028145cc&gt;] device_for_each_child+0x6c/0xe0
[    0.652788] [&lt;90000000026da95c&gt;] acpi_dev_for_each_child+0x3c/0x60
[    0.658930] [&lt;90000000026dd514&gt;] acpi_bus_attach+0x214/0x2e0
[    0.664554] [&lt;90000000026dfd80&gt;] acpi_bus_scan+0x60/0x220
[    0.669920] [&lt;9000000002d9c2c8&gt;] acpi_scan_init+0x198/0x30c
[    0.675461] [&lt;9000000002d9bef8&gt;] acpi_init+0x4c8/0x558
[    0.680567] [&lt;90000000020a0178&gt;] do_one_initcall+0x78/0x200
[    0.686105] [&lt;9000000002d71514&gt;] kernel_init_freeable+0x238/0x2b4
[    0.692162] [&lt;9000000002d61244&gt;] kernel_init+0x20/0x11c
[    0.697355] [&lt;90000000020a13e8&gt;] ret_from_kernel_thread+0xc/0xa4
[    0.703323] 
[    0.704796] Code: 001502fd  53ff5fff  03400000 &lt;002a0001&gt; 001503e4  29c0a071  29c08068  29c06074  29c0406c 
[    0.714500] 
[    0.715976] ---[ end trace 0000000000000000 ]---
[    0.720567] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    0.728178] Kernel relocated by 0x1e80000
[    0.732158]  .text @ 0x9000000002080000
[    0.735964]  .data @ 0x9000000002e00000
[    0.739769]  .bss  @ 0x9000000003832000
[    0.743576] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ]---
lang

我在集特的板子上也启动不了新世界，命令行界面进不去
xunmi

lang 你用的板子固件是uefi吗, 有物理地址的选项不
lang

是的，也开了物理地址
本站文章除其作者特殊声明外，一律采用CC BY-NC-SA 4.0许可协议进行授权。
进行转载或二次创作时务必以相同协议进行共享，严禁用于商业用途。